This write-up is split into two parts: Front and Rear. All the steps necessary to successfully install this lift are listed in order in the menu. Its been reported to me that as of August 17, 2007 Fabtech still has not updated their installation instructions. Considering that this kit was released in 2002, it's probably safe to say that they have no intention of ever updating the instructions, therefore my recommendation to you is to throw them in the recycle bin because they really aren't that helpful anyway.
- Home
- Pre-Installation Notes
- Front Installation
- Raise the Vehicle
- Remove Skid Plates
- Remove Sway Bar
- Remove Tie Rods
- Remove Brake Calipers
- Remove Brake Rotors
- Remove Ball Joints
- Remove Shocks
- Remove Steering Coupler
- Remove Steering Rack
- Remove Lower Control Arms
- Disconnect Driveshaft
- Remove Differential
- Cut Rear Crossmember
- Install Rear Crossmember
- Install Steering Coupler
- Install the Differential
- Install Front Crossmember
- Install Lower Control Arms
- Install Steering Rack
- Attach Steering Coupler
- Rebuild the Shocks
- Remove the Hubs
- Press the Bearings (Pt. 1)
- Press the Bearings (Pt. 2)
- Install the Ball Joints
- Install the Steering Knuckles
- Modify the Brake Lines
- Install the Brake Line Brackets
- Flip the Steering Line Bracket
- Reposition the Steering Line Bracket
- Install the Sway Bar Brackets
- Install the Skid Plate
- Install the Impact Strut Mounts
- Install the Impact Struts
- Install the Wheels and Tires
- Rear Installation